High-Speed & Premium Quality Print

For the Geeetech M1 we have focused on designing a fast and portable 3D printer that can deliver quality prints whether you are a beginner or seasoned pro. This is made possible due to the large-capacity nozzle that is combined with a direct drive extruder, a 50W hot-end heating rod, a heated bed and a large-size model cooling fan, resulting in a printing speed of up to 250mm/s.

We have also been designing the custom firmware for our small 3D printer, which comes with 2 advanced algorithms out of the box.
With the input shaping firmware, the M1 printer minimizes vibrations and ringing artifacts in the 3D prints, allowing you to print at much higher speeds without reducing the quality.

Using the pressure advance functionality, you will see the results in form of a more consistent extrusion, as our firmware prevents the blobs that typically form at corners or during acceleration of the print head. This gives you sharper corners and less stringing effects. This makes our M1 the best 3D printer for small prints at the moment!

Stable Structure

We have also been working on designing the overall structure for the Geeetech M1 3d printer, making designs to ensure that the entire machine remains firm and stable while printing at high speeds, in order to produce premium quality results, making it the best 3D printer for beginners looking to get started with ease. Some of the designs include:

• Leather pulley reinforcement
• Hotbed three bearings
• Thickened filament bracket
• Premium hardness plastic

Direct Drive Extruder

One of the main innovations on the Geeetech M1 is the dual-drive gear Direct Drive Extruder with a gear ratio of up to 5:1, which allows for fast 3D printing, and provides greater torque, greater extrusion force, faster response speed and a higher printing accuracy compared to BOWDEN extruders that are common on the market currently. Due to this innovation, it also becomes easier to print with soft TPU materials and flexible filament.

Fully Automatic 16-point Leveling

Another reason why we believe this is a good beginner 3D printer for everyone getting started with printing, is that the Geeetech M1 integrates a high-precision pressure sensor on the hot end, that is designed to measure the flatness of the hot bed throughout the nozzle. This provides a fully automatic hotbed leveling, which in turn greatly reduces the difficulty for beginners in setting up and calibrating the machine.

High Torque Stepper Motors ( 1.8°stepper motors )

For stepper motors,  the Geeetech M1 uses 42*42*35mm NEMA 17 motors on both the X, Y and Z-axis, which results in more power and precision. The direct drive extruder makes use of a 36*19.5mm Nema 14-round stepper motor, which effectively reduces the weight of the print head, while meeting the performance requirements we have set forth in our design documents.

Efficient Heat Dissipation

One issue that fast 3D printing is known for is a buildup of heat. However, with our innovative design the Geeetech M1 has effectively solved the problem with overheating on printers of this size, due to the 50×50×15mm large-size blower that improves printing speed and model quality while keeping everything cooled down to the appropriate temperatures. We have even added a cooling fan to the motherboard for the stepper motor drive in order to further ensure proper heat dissipation and reliability during high-speed printing.

Filament Runout Sensor

Continuing with the theme of being beginner friendly, the Geeetech M1 has an advanced detection sensor for filament breaks and running out. This way the printer will stop if the 3D printer filament breaks or runs out at any point during the printing process. You can also resume the printing once you have fixed the filament break or resupply filament, allowing you to keep your print without having to start all over.
And the filament runout sensor with tension release function which aims to avoid filament breaks due to friction.

Automatic Nozzle Cleaner

Based on feedback and results from our previous 3D printers, we have designed the Geeetech M1 with an automatic cleaning nozzle device, that handles nozzle maintenance which is one of the most common issues. This way you do not have to manually clean after every print.
And more, the silicone brush that can withstand temperatures up to 300°C for a short time, and

the brush has a good performance of removing residue and exudate from the nozzle and has little wear. I guess the most important point that customers want to know is whether the automatic nozzle cleaner will interfere with the movement of the print head. The answer is NO. The automatic nozzle cleaner will not affect the work of the print head.

More User-Friendly Designs

We have also designed the Geeetech M1 to be a great 3D printer for kids, as the user-friendly interface includes a 2.4″ LCD color screen with ample space for displaying all the necessary information. The PEI print plate makes it easy to remove the model after printing, and the added 3 high-brightness LED lights provide plenty of light to make it easy to work on the machine or the print at any time of day.

Tech Specs of Geeetech M1

Here is a video on unboxing and setup tutorial of Geeetech M1 Mini 3D Printer:

The Printout of Geeetech M1

Below you can see a few examples of the prints made with our Geeetech M1, which also uses Geeetech 3D printer filament. The first two images show the soft prints made with TPU filament, which is a flexible material that still provides high fidelity and accurate details, while also being incredibly malleable.

The final image shows a few objects made with PLA filament, which is one of the most common types of filament used in the market. The prints have lovely smooth surfaces without any rough parts, and since the material itself has a low cost, it is the perfect filament to combine with the M1 for some of the best budget 3D printer results available on the market at the moment.

• Instagram
• Facebook
• Twitter
• YouTube

Geeetech bringt nun einen neuen 3D Drucker auf den Markt: den Geeetech M1 3D Drucker.

Der Vorverkauf startet am 25. Februar 2025!

Wir stellen dir heute diesen Mini 3D Drucker vor, der vor allem durch seine Geschwindigkeit und sein kompaktes Design heraussteht und unglaublich viele neue Features hat!

High-Speed & Premiumqualität

Eine Eigenschaft, die einfach genial ist, ist die Kombination aus hoher Geschwindigkeit und hoher Qualität. Möchtest du einen 3D Drucker kaufen, ist dieser Mini 3D Drucker eine sehr gute Wahl.

Nicht jeder FDM 3D Drucker ist schnell und kann zusätzlich mit Premiumqualität drucken.

Der GEEETECH M1 verfügt über eine Düse mit großer Kapazität, einen Extruder mit Direktantrieb, einen 50-W-Hot-End-Heizstab, ein beheiztes Bett, einen Kühlventilator für große Modelle und hat eine Druckgeschwindigkeit von bis zu 250 mm/s.

Es dauert sage und schreibe nur 29 Minuten, um ein 3D Benchy zu drucken!

Das klingt nach High-Speed, oder?

Die GEEETECH M1-Firmware hat zwei fortschrittliche integrierte Algorithmen: Input Shaping und Pressure Advance. In Kombination mit einem Extruder mit Direktantrieb kann also ein hochwertiger Druck bei hoher Geschwindigkeit erreicht werden.

Stabile Struktur

Geeetech legt beim M1 viel Wert auf ein stabiles Gehäuse und das Design, denn je stabiler die Struktur ist, umso präziser kann gedruckt werden. Geeetech M1 ist ein perfekter 3D Drucker für Einsteiger, denn das Gehäuse ist stabil und bietet eine perfekte Grundlage für problemloses 3D Drucken und ist so ein 3D Drucker bester Qualität.

Im Vergleich zu ähnlichen Produkten wurde die Struktur des GEEETECH M1 verbessert, um sicherzustellen, dass die gesamte Maschinenstruktur fester und stabiler als andere Drucker ist und dadurch eine grundlegende Garantie für schnelles und qualitativ hochwertiges Drucken bietet.

1. Verstärkung der Lederriemenscheibe
2. Drei Lager für die Heizplatte
3. Verdickte Filamenthalterung
4. Hochwertiger Hartkunststoff

Direktantrieb-Extruder

Wie funktioniert ein 3D Drucker bzw. der Extruder? 3D Drucker können verschiedene Extruder verwenden. Es gibt Bowden Extruder, Dual Extruder oder auch hybride Extruder.
Der GEEETECH M1 verfügt über einen Direktantriebs-Extruder mit Dual-Drive-Getrieben und einem Übersetzungsverhältnis von bis zu 5:1.

Im Vergleich zum BOWDEN-Extruder verfügt er über ein höheres Drehmoment, eine höhere Extrusionskraft, eine schnellere Reaktionsgeschwindigkeit, eine höhere Druckgenauigkeit und kann problemlos weiche TPU-Materialien drucken.

Vollautomatische 16-Punkt-Nivellierung

Der Mini 3D Drucker Geeetech M1 verwendet eine vollautomatische 16 Punkt-Nivellierung. Was bedeutet das?

Geeetech M1 integriert einen hochpräzisen Drucksensor am Hotend, misst die Ebenheit des Heizbetts durch die Düse und erreicht eine hochpräzise vollautomatische Nivellierung des Heizbetts, was die Einstiegsschwelle für Anfänger erheblich senkt.
Durch dieses Feature ist der Mini 3D Drucker ein perfekter 3D Drucker für Einsteiger.

Großer Schrittmotormit hohem Drehmoment

Möchte man einen 3D Drucker kaufen, ist der M1 eine perfekte Wahl, denn es ist ein Mini 3D Drucker und ein schneller 3D Drucker.

Wie es möglich ist? Ein Aspekt ist der Motor!

Im Vergleich zu ähnlichen Produkten verwendet Geeetech M1 einen Schrittmotor mit hohem Drehmoment (1.8° Schrittmotor), um die Gesamtleistung zu verbessern.

Die X-Achse, Y-Achse und Z-Achse verwenden alle 42 x 42 x 35 mm große NEMA 17-Motoren, um jeder Achse viel Leistung zu verleihen. Der Extruder verwendet einen 36 x 19,5 mm großen Nema 14-Rundschrittmotor, der das Gewicht des Druckkopfs effektiv reduziert und gleichzeitig die Leistungsanforderungen erfüllt.

Effiziente Wärmeableitung

Ein schneller 3D Drucker braucht ein qualitativ erstklassiges Konzept, um Überhitzung zu vermeiden, sodass mit hoher Geschwindigkeit gedruckt werden kann.

Geeetech M1 ist mit einem 50 × 50 × 15 mm großen Lüfter ausgestattet, um die Druckgeschwindigkeit und Modellqualität zu verbessern und das Überhitzungsproblem beim Hochgeschwindigkeitsdruck effektiv zu lösen.

Gleichzeitig wird dem Schrittmotorantrieb des Motherboards ein Kühllüfter hinzugefügt, um die Stabilität und Zuverlässigkeit weiter zu verbessern.

Filament-Runout-Sensor

Geeetech M1 ist mit einem Filament-Runout-Sensor.

Wenn das Filament während des Druckvorgangs reißt, unterbricht Geeetech M1 den Druckvorgang automatisch. So können weitere Komplikationen vorgebeugt werden! Nachdem das Filament wieder richtig positioniert wurde, kann der Druckvorgang fortgeführt werden.

Der Filament-Runout-Sensor erkennt, wenn Filament leer ist, sodass auch hier der Druckvorgang pausiert wird und nach Einsetzen von neuem Filament weitergeführt werden kann.

Automatischer Düsenreiniger

Um die Nivellierung und Druckgenauigkeit zu verbessern, ist Geeetech M1 mit einer automatischen Düsenreinigungsvorrichtung auf der Druckplattform ausgestattet.

Die Silicon Bürste, die hier verwendet wird, kann kurzfristig hohen Temperaturen bis zu 300°C standhalten und reinigt Rückstände und Exsudate sehr präzise. Außerdem ist der Verschleiß sehr gering. Vorteil des automatischen Düsenreinigers ist, dass er den Druckkopf und dessen Arbeit nicht behindert.

Dadurch gehört der M1 Mini 3D Drucker zu den besten 3D Druckern, da detaillierte Drucke auf höchstem Niveau möglich sind.

Benutzerfreundlicheres Design

Neben technischen Features bietet der M1 auch ein benutzerfreundliches Design. Deshalb ist der Mini 3D Drucker für Anfänger eine perfekte Anschaffung. Der Einsteiger 3D Drucker ist mit einem 2,4-Zoll-LCD Farbbildschirm ausgerüstet. Dies ermöglicht eine bequeme Bedienung aufgrund der größeren Anzeigegröße.

Der Geetech M1 verwendet eine PEI-Druckplatte, von der man Modelle einfach entfernen kann und trotzdem eine haftende Druckunterlage zum Drucken hat.
Im Gehäuse sind drei extra helle LEDs angebracht, sodass das Druckobjekt zu jederzeit optimal beleuchtet ist.

Technische Daten des Geeetech M1

Hier findest du alle wichtigen Informationen und Daten zum Geeetech M1:

Druckerart: FDM

Druckdicke: 0.1-0.2mm

Druckgröße: 100*110*100mm

Druckgeschwindigkeit:<250mm/s

Druckgenauigkeit: +-0.1mm

Slicing Software: Orcaslicer, Cura

Maximale Düsentemperatur: 230°C

Maximale Druckbetttemperatur: 60°C

Maschinengröße:270(L)*200(W)*298(H)mm

Netto-Gewicht: 3kg

Eingangsleistung: DC 24V

Leistungsausgabe: 96W

Unterstützte Verbrauchsmaterialien: 1.75mm, PLA/TPU

Druckmethoden: TF card, USB cable

Düsendurchmesser: 0.4mm

Anzahl der Düsen: 1

Unterstütztes Dateiformat: .Gcode

Betriebsumgebungstemperatur: 10-40°C

Verpackungsgröße: 257(L)*270(W)ü405(H)mm

Verpackungsgewicht: 4kg

Hier ist ein Video zum Unboxing und Einrichtungs-Tutorial des Geeetech M1 Mini 3D-Druckers:

Das Printout von Geeetech M1

Es gibt bereits einige 3D Drucker Projekte des Geeetech M1.
Verwendet wurden dabei zwei Geeetech Filamente: TPU Filament und PLA Filament.

Der Druck beider Materialien ist sehr präzise, und die Druckobjekte weisen eine hohe Realitätsgetreue auf.

Material: TPU Filament

Die TPU Filament gedruckten Objekte weisen eine gute Elastizität und Flexibilität auf. Entsprechend den Materialeigenschaften von TPU ist das Objekt sehr abriebfest, chemikalienbeständig und lässt sich auch nicht von Temperaturen beschädigen.

Möchtest du mehr zum Thema TPU Druck erfahren, dann solltest du dir unseren Blogpost zum Thema Print Guide TPU durchlesen.

Material: PLA filament

Verwendet man das PLA Filament beim Druck mit dem Geeetech M1, dann sticht besonders die Oberflächenqualität heraus. Objekte können mit sehr glatten Oberflächen gedruckt werden und benötigen kaum oder gar keine Nachbearbeitung, da es keine „rauen Stellen“ gibt.

Druckobjekte mit PLA sind aufgrund der Materialeigenschaften von PLA nicht elastisch und flexibel, sondern sehr steif.
Erfahre mehr zum Thema, wie PLA optimal gedruckt werden kann, in unserem PLA Print Guide!

• Instagram
• Facebook
• Twitter
• YouTube

What Is Formnext?

Formnext 2024 was held in Frankfurt, Germany, and offered us unique insights into the world of 3D printing. More than 30.000 guests and visitors perused many different stalls and booths displaying their products or techniques, allowing for discussion and learning during the 3-day long expo for all things 3D printing related.

This year we saw that they were focusing on stability and expanding previously established patterns and 3D printing service solutions to increase the efficiency and improve the output quality as much as possible. But of course, there were also many new items and products on display as well such as FDM printers and more.

Some Upgrades of Desktop 3D Printers

We also saw some interesting upgrades in the desktop 3D printer scene, where a couple of manufacturers really stood out to us with their latest innovative inventions.

Bigger and Faster Multicolor 3D Printers

In the space of multicolor printing, we saw an advanced desktop printer using the CoreXY systems, which can achieve great speeds, while also providing up to four different types of filament all joined in the same central hub. For now, the size would still be classified as a desktop printer, which is good news in terms of price once it has finished the development stage.

Active Chamber Temperature Control

We also saw somewhat of a surprise in the form of an enclosed CoreXY printer that comes with active chamber control as the big selling point. While the model was not fully ready for production yet, it allowed for quite a large overall print size of up to 250 x 220 x 270 mm. And the quality of the prints we saw looked really promising so we are eagerly awaiting more news of the actual market launch.

If you are looking for the best 3D printer for beginners to get started right away, you might be interested in our very own Geeetech Mizar M model. This is one of the best hobby 3D printer solutions out there right now, offering cheap 3D printing and excellent quality prints.

As a low-cost desktop printer, Mizar M’s features are competitive with comparable printers in the market. Now, let’s see what the features of Mizar M are:

• Dual extruder: It comes with a dual extruder print head for multicolor prints and has a dual Z-axis setup that makes your prints look amazing and smooth.

• Large printer volume: Compared to other 3D printers on the market at the same price, the overall print dimensions are also quite favorable. The Mizar M allows you to print designs up to 255 x 255 x 260 mm, among the best dimensions for a standard desktop printer.
• Silent printing: Mizar M has a 32-bit silenced motherboard which results in a quiet printing environment that will not wake up your neighbors or annoy you while working on other projects in your home.
• High print accuracy: Mizar M has a +/- 0.1mm accuracy, resulting in very precise models that closely resemble your 3D model. And its layers’ thickness is between 0.1 and 0.2 millimeters, resulting in a very fine surface once the complete print has been produced.
• Compatible with multiple materials filament: Geeetech printer Mizar M supports PLA, ABS and PETG to name a few, making it a versatile option that can produce both outdoor and indoor prints.

Sustainability of 3D Printing Materials

Another key part of the Formnext 2024 exhibition was highlighting the sustainability compared to alternative methods for printing. Here we saw different 3D printing materials made of different types of sustainable 3D printer filament that makes the printing process extremely eco-friendly.

We also witnessed an interesting invention that used a new type of extrusion system designed to work with recycled filament to cut down on the overall waste of the 3D printer process.

This design has made it possible to reuse old prints and discarded strings of filament, by processing the filament and material that would otherwise be wasted and producing very fine results. We are excited to see how this technology will develop in the future, and whether it will be something every 3D printer will come equipped with once the principles and practical application have been perfected.

Large-Format Printers

One interesting machine showcased was a large 3D printer with a 6-axis robotic arm of 2.8 meters, but not only that, the raised platform bed has another 2-axis, making it possible to create some truly stunning and smooth 3D prints with ease. And the dimensions of the printer allow for a scale that most hobby printers can only dream of.

Another big 3D printer we saw up close was one that takes vat photopolymerization and stereolithography to a new level. Typically these types of printers are reserved for smaller prints, but this model provided us with an example that has 3 lasers in an overlapping arrangement making it possible to 3D print somewhat narrow but very long pieces with precision and speed.

There were quite a few other large-format printers on display of equal interest, leading us to conclude many of the manufacturing companies of these 3D printers are aiming to obtain market shares for large-scale production with a focus on speed, automation and efficient production yields.

3D-Printing Human Tissue Models

We also witnessed a somewhat unexpected type of 3D printing material that gave us a unique experience in the form of a medical type of printing material called a bioink, that can 3D print human tissue models.

We already knew of this invention due to previous innovations regarding stem cell printing, and now the technology has advanced further with additive manufacturing that can produce hundreds of tissues in a single day. There have already been successful results with printing brain and spinal cord tissues, and even skin, leading us excited for where this technology can end up in the near future combined with advanced 3D models.

Introduction to the Alkaid 3D Printer

_{1) High precision. ALKAlD features a 6.08-inch monochrome LCD with 2K HD definition, enabling X/Y accuracy up to 0.05mm.}

_{2) Premume printing quality. Its z-axis uses a high-cost linear guide rail, which has the characteristics of high rigidity, high load, automatic self-aligning, absorbing assembly errors, etc., which can effectively improve the overall printing quality of 3D printers.}

_{3) New matrix UV light source. The matrix light source uses 15 pieces of high-light power quartz lamp beads, with professional optical materials made of the matrix lens, so that ultraviolet irradiation on the LCD screen is more uniform, and higher intensity, effectively improving the printing speed and accuracy.}

_{4) High-efficiency cooling system. The rugged Alkaid innovates by integrating UV lamp beads on the aluminum substrate at the bottom of the machine, allowing for a greater heat dissipation area. With the cooling fan, it can effectively reduce the temperature of the lamp board and extend the service life of the UV lamp beads.}

5) Professional UV-blocking cover. Alkaid transparent cover contains anti-UV element, which can effectively filter UV light of 405nm wavelength, and the blocking rate is up to 99.96%. The cover can not only ensure the printer’s UV light does not leak but also ensure the external UV light does not affect the printer’s normal work.

_{6) User Friendly. Alkaid is easy to operate and affordable, making it ideal for beginners and amateurs and one of the best 3d resin printers. In addition, Geeetech can provide ODM and OEM custom design and manufacturing.}

ALKAID LCD 3D PRINTER

1. 6.08″2K Resolution. With high precision and fast printing speed, it can bring you high-level detailed printed models.
2. Premium Linear Guide Rail. It has outstanding features of high rigidity, high load, and automatic self-aligning.
3. New Matrix Light Source. 15 high-power quartz UV lamp beads with the combined matrix lens contribute to more uniform and higher intensity UV light.

Skills and experience in maintaining printers are important, we all start from beginners to masters. As time passes by you will find that you are excellent at maintaining printers and have lots of experience for sharing.

Guidance of operation and maintenance.

How to replace UV Light: The following is a video tutorial to replace the UV lamp, please follow the tutorial. 

For motherboard replacement: The following is a video tutorial to replace the motherboard, please follow the tutorial. purchase link Alkaid resin 3d printer motherboard.

Replacement for FEP Film: First please prepare a sheet of Alkaid FEP film and install the new FEP film.

If the pressure plate is damaged, please refer to the following advice. Here’s the pressure plate purchase link.

The rupture of the pressure plate will cause the resin in the resin box to leak onto the printing screen, and the resin is corrosive and likely to corrode the printing screen. When replacing the FEP film, please be careful not to use too much force, just make sure that the screw is screwed properly, if too much force will cause the pressure plate to crack.

DEBUT OF GEEETECH TG-21 PRINTING PEN

In pursuing the greatest performance of the printing pen effect, we have officially launched our latest 3D printing pen– TG-21. Sleek, dynamic, and user-friendly, the newly released Geeetech 3D pen is an advanced printing pen that is compatible with various filaments such as ABS, PLA, and PCL. It will surely offer you every possibility with the flexibility to get an approach to the easy-to-use technology. A highly recommended and perfectly go-to 3D printing solution for your every creative thought with just a pen IN HAND.

Eager for more details? Let’s just take a precise look at it.

• Designed With Comfort | ART OF MINIMALIST

In this newly launched 3D printing pen, we adopt a far more concise and delicate appearance. From its outermost shell, we design it with a frosted material to pursue the best touching experience of its gripping feelings. From its colors, three hues of minimalist are included in this series, namely White, Grey, and Black.

• LCD Display | REAL-TIME MONITORING

Equipped with an LCD screen for displaying printing information, this latest 3D printing pen allows you to intuitively observe the current working status of the printing pen, updating every single detail of the working status. Meantime, the visual digital statistics deliver the feedback in time revealing real-time monitoring.

• Eight Speed Modes | ADJUSTABLE LOADING SPEED

As every 3D printing lover knows, the loading speed of the filament will directly influence the thickness and the even heat of the extruded filaments. Because printing speed is one of the most crucial factors in the 3D printing process, an adjustable speed gear should be a must-have function in a 3D printing pen design. This new Geeetech 3D printing pen possesses 8-speed modes, which allows you to adjust and control the whole printing process in real-time without pausing. In this function, you can select a suitable speed mode for your models of variant shapes and complex structures.

• Adjustable Temperature | OPTIMAL FINE-TUNING

For SMOOTH PRINTING Experience. As another one of the most crucial factors in 3D printing, the temperature adjustment function will always be an essential part of most 3D printing machines, and, of course, 3D printing pens require it as well. With this Geeetech TG-21 printing pen, you can adjust the printing temperature and speed without pausing your drawing process. And it will surely bring you fluent and smooth operation, while never bothering and impeding your time for any DIY ideas.

• Smart Sleep Mode | AUTO-PROTECTION MECHANISM

Adopting an automatic protection mechanism, the product will automatically turn into its sleep mode if it hasn’t been working for 1 minute, or, if it has continuously been working for 8 minutes. In this mechanism, it will protect the pen to the largest extent, ensuring the service life of itself. So if your Geeetech 3D printing pen is going to shut down, don’t worry, it is not going on strike but just wants to take a break.

• Excellent Ergonomic Design | SLEEK AND SMOOTH CURVE

This Geeetech 3D printing pen adopts an excellent ergonomic design with a sleek and smooth curve, which, as we promise, will offer you the most comfortable touch feelings when you are applying it. With a superb outfit of delicate craftsmanship, it gives you a smoother usage, and in the meantime, allows you to enjoy the creating time as well as the delight the technology brings to you. In addition, it is equipped with an easily detachable pen tip with a ceramic nozzle, and is quite easy for the users to exchange the partial components.

Geeetech TG-21 will be sold at ONLY $42.9 on our official website and can be shipped to worldwide countries. It will be displayed in 3 different colors: grey, black, and white. To know more about our newly released 3D printing pen, please check out our website for further details.

Halloween is around the corner.However,you may choose to celebrate safely at home because of the ongoing COVID-19 pandemic.So why not spend your time with your favorite 3D printers?

Look at these great 3D printers and filaments for some holiday fun on the cheap.Now we offered deep discounts on our Amazon products.The Promotion for 3D printers,up to 20% off with extra coupon,starting from 135.20€ .We have multicoloured filaments to choose from in addition to the basic black and white filaments,up to 45%off,starting from 15.69€.Hurry up and buy!

• US:
• Duration: Oct.22.2020-Nov.1.2020
• Check out the link below to take 12% off oders and Save an extra $35.00 now:
• https://www.amazon.com/gp/mpc/A2EC73LZDELVIR

The coupon shown on the Amazon product page is available to everyone and can be superimposed upon the discount. You can get around 20% off on the total price on some items.

• Five countries in Europe:
• Duration:Oct.26.2020-Nov.1.2020
• pro B,pro W:5%off
• A10,A20:20%off
• PLA:15%off（Silk PLA/Grow in dark filament）

• ES:
• Promotion for 3D printers,up to 20% off,starting from 143.20 €:
• Pro B:https://amzn.to/2HdHCTS
• A10:https://amzn.to/3jd5e88
• A20:https://amzn.to/2IMw0I5
• Promotion for filaments,20%off,starting from 18.39 €:
• White PLA:https://amzn.to/37AdZHt
• Black PLA:https://amzn.to/3m1UxHf
• Silk PLA:https://amzn.to/3m46490
• Glow In The Dark PLA:https://amzn.to/2T8Wm93

• FR:
• Promotion for 3D printers,up to 20% off,starting from 135.20€:
• Pro B:https://amzn.to/3gNuUI9
• A10:https://amzn.to/3gd1J0S
• A20:https://amzn.to/30nouK3
• Promotion for filaments,up to 23%off,starting from 15.99€:
• PLA:https://amzn.to/39HDSUN
• Silk PLA:https://amzn.to/2SRRtBb
• Glow In The Dark PLA:https://amzn.to/2ZZECRM

• UK:
• Promotion for 3D printers,up to 20% off with £30 coupon,starting from £115.20:
• Pro B:https://amzn.to/3jd4O1y
• A10:https://amzn.to/39Qj4JP
• A20:https://amzn.to/2wbgmQy
• Promotion for filaments,up to 45%off,starting from £14.25:
• PLA:https://amzn.to/3d3it9H
• PLA:https://amzn.to/3dF9goG
• Silk PLA:https://amzn.to/2Uo3xur
• Glow In The Dark PLA:https://amzn.to/35iPSKB

• IT:
• Promotion for 3D printers,up to 20% off,starting from 135.20 €:
• Pro B:https://amzn.to/2H9hda2
• A10 Pro:https://amzn.to/2m7vPeS 
• A20:https://amzn.to/3bK3QaZ
• Promotion for filaments,12%off,starting from 21.99 €:
• White PLA:https://amzn.to/3hh6Cq4 
• Black PLA:https://amzn.to/3j2EasN 
• Silk PLA:https://amzn.to/2kNiHeY
• Glow In The Dark PLA:https://amzn.to/2lZAU9b

• DE:
• Promotion for 3D printers,up to 20% off（The promotion is about to begin）:
• Pro B:https://amzn.to/3a0nGxR
• Pro W:https://amzn.to/3fuvAk8
• A10:https://amzn.to/39Agicf
• A20:https://amzn.to/3fTyNuz
• Promotion for filaments,up to 32%off,starting from €16.99:
• White PLA:https://amzn.to/30Hby0j
• Black PLA:https://amzn.to/2W3W3LC
• Silk PLA:https://amzn.to/2BzinZC
• Glow In The Dark PLA:https://amzn.to/3jeJE4z

The start up Redefine Meat,founded in 2018,called on people to practice vegetarianism concept by 3D printing the steak instead of slaughtering animals for food.The company claims its steaks look,taste and feel just like real steaks,don’t require any real cattle to be involved in the production process,and are sourced entirely from natural,sustainable ingredients.What’s more,all the cooking methods,whether roast,slow cooking or grilling,can be applied to their artificial meat,which tastes even better than real meat.The good news is that it will be in high-end restaurants in Israel,Germany and Switzerland by the end of this year.

Redefine Meat uses:”proprietary 3D meat modelling,food formulations and food printing technology to deliver a new category of complex-matrix’meat’in a cost effective and scalable way”.The steak itself is made from a mix of soy and pea proteins,coconut fat and sunflower oil,plus natural flavors and colors everyone will love.

CEO Eshchar Ben-Shitrit specializes in manufacturing industrial-level 3D printers that will eventually be sold to meat distributors worldwide and become part of the meat supply chain.the CEO calls it”the best way to fight climate change,to deliver healthier solutions and food to the entire population of the planet.”It’s been reported that the coronavirus came from a sick bat,but it wouldn’t happen with the 3D printing meat,which is much cleaner.

The market for artificial meat has been very competitive in recent years,but Redefine Meat is focusing on expanding production by combining 3D printing technology with artificial meat production.

Are you bullish on this company?Will you try the 3D-printed vegan steak?Leave a comment below to tell me what you think.

My grandmother is suffering from arthritis which makes it painful for the joints to move. Owing to this physical ailment, her daily life is very inconvenient. As an example, she found routine tasks like opening jars and even holding a toothbrush to be troublesome and painful. I hope to improve her quality of life through these plastic gadgets.

When Grandma first saw these gadgets, she felt elated and told me this was one of the best gifts for her. It is known to all that adaptive aids in the shop are vastly more expensive than the standard gadgets and that is why she got so excited. Finally, I decided to show her how the gadgets were printed by the Geeetech 3D printer. However, she complained that the printer cost too much. So I made a careful calculation with a typical adaptive aid costs about $25, and we use a 3D printer to print gadgets for $1 each. We save money by printing more, and there are a lot of possibilities. She wholeheartedly endorse my remarks.

Here are some of the gadgets I gave her:

I’m pretty sure there will be more 3D printing applications in the future. Why not get one for a try? If you want to know how much is a 3d printer, then welcome to visit our website. You can also select the best 3d printer filament for your new designs from Geeetech!

PERI GmbH built Germany’s first 3D-printed residential building in Bekum,Beckum, North Rhine-Westphalia. The house consists of two-storey detached house, each with about 80 square metres of living space, and was built using a 3D building printer.

3D building printing has fundamentally changed the way we build and the process of residential construction.Leonhard Braig，director of production and supply chain at PERI GmbH, said: “Because this is the first building of its kind, the printing speed we proposed was slower than the actual speed.”adding that they hope to take this opportunity to gain more experience in their day-to-day operations, as this will help them make greater use of the technology to make the cost come down in their next project.

The first 3D printed building in Germany was designed by MENSE-KORTE ingenieure + architekten fora design firm named Hous3Druck GmbH.To build it, PERI used 3D printers of type BOD2 for printing., which can be moved from anywhere in the building along its metallic frame and only needs to be calibrated once.

“With conventional construction methods, this would only be possible at great financial cost.” said Waldemar Korte, partner at Mense-Korte. He thought the printing process allows designers more freedom in residential construction.

The building consists of triple-skin cavity walls filled with an insulating compound. During the printing process, the printer takes into account all the pipes and connections to be laid later,such as water pipes,wire way,etc.

BOD2 allows workers to perform work within the print area during printing.This means manual work, such as installing empty pipes and connections, can be easily integrated into the printing process.

Likewise, humidity is a natural enemy of filaments. Some materials have no humidity problem. Others, such as PVA or nylon, are very hygroscopic and absorb water after a very short time. The wet filament sizzles and is easy to recognize during printing, and the results are terrible. Therefore, it is particularly important to store filament spools carefully and correctly.

Why Water Damages Thermoplastics

All plastics are polymers or copolymers. you’ll see that the long molecular strands that make up them are woven together when you look at polymers or copolymers under a high-intensity microscope,That means there’s plenty of space between and around the strands.Thererfore, most polymers and copolymers are hygroscopic.Some filament materials, such as Nylon, are very sensitive to water .If  they absorb only a little water, they can cause problems when printing.

How To Keep Your 3D Printer Filament Dry

Storing your filament in an airtight container with a desiccant is the easiest way to settle this issue.Filament dry boxes work well, but they can be bulky.

when it comes to airtight,most people think of plastic containers and bags.For the most part, these are good short-term solutions.

Nevertheless, over time, plastic containers and bags become slightly permeable.This means that the longer your printing materials stay in plastic bags, the more water they absorb, .especially when you live in a humid climate. .If you use a clear bag or box, UV light will also reduce the strength of the filament over time.

Using high-quality Mylar bags or bags made of similar materials is a better solution is to store your thermoplastic.Obviously, there is a layer of metal between two layers of plastic.This metal layer protects your printing material from any water vapor that permeates the plastic.So that your printing material produces a satisfactory result.

How You Know Your Printing Material Has Absorbed Water

Before printing, there are two simple ways to determine if your material is absorbing water.First, you can measure the diameter of the material itself.when a polymer absorbs water, it begins to grow in size.If the diameter of the filament increases by 10 percent or more, it most likely absorbs water.

Another way to determine whether a filament absorbs water is to extrude a small amount of filament before printing.We’ve all probably been there: sitting by a fire, listening to its crackle.This is because the water in the wood is changed into steam when heated.The same phenomenon occurs when you extrude thermoplastic that has absorbed water.The heat from the print end causes the water in the plastic to expand and escape.You can hear hissing or popping and also see bubbles.

How to Dry Out Filament

If your filament is wet, you must dry it out before using it to print.Why not use an oven?

In the first place, check out the glass transition temperature for the filament that you are going to dry.You need to be sure that you keep your oven temperature below the transition temperature. In a general way , about 60-70C is just about right for most materials, except may be a bit hot for lower temp materials like PLA. Always keep in mind how hot your oven runs and only use electric ovens.

You should also be aware, even if the Glass Transition temp is very high, for a material like Nylon or Polycarbonate – the spool your filament is wound on is likely made from an ABS which will soften at lower temperatures than the filament. 

How to dry PLA filament

You ought to be more careful when you dry PLA filament on account that 70C will be too hot. We recommend at the very lowest temp your oven will go around 40C. Even at this temp your PLA will soften, so drying PLA in the oven won’t always give you the results you’re after. It’s a small reminder as to the importance of keeping excellent PLA storage. 

Once the oven it up to temperature, place the spooled material inside and leave it there for four to six hours. If you have a convection oven, this drying time may be shortened since the circulated air removes more moisture from the material more quickly.You can also ‘recharge’ the desiccant this way too, placing it in the oven over a low heat. 

Once the time is up, remove the material from the oven, allow it to cool and place it into a water impermeable container or bag along with desiccants. Make sure that the container or bag is completely sealed.

Any material that you have oven-dried is slightly more brittle than normal.Remember,Handle the material with care.Only then can you achieve the superior results with your properly dry print material.